- DC24V constant pressure single head power supply, transistor constant current drive, two lights one shear, high utilization rate, good consistency.
- 175°TV large Angle diffuse reflection optical lens, uniform light effect without macular.
- The light source adopts OSRAM SMD3030, high brightness, low light fading, good color, long life and good stability.
- High heat conduction aluminum substrate with 1.2mm thickness provides reliable heat dissipation for light source and improves product life.
- Low pressure operation, wide application environment, safety and reliability.
- Terminal connection, stable and easy to maintain.
|Longest play distance
Installation electrical diagram
LED light efficiency data
- the mainline of the power supply shall use a cable of more than 2×2.5mm squared. If the power line of the straight lamp needs to be extended, it shall choose a wire of specifications of more than 1.5mm squared /16# to avoid excessive heating of the power line caused by overload and adverse consequences. The length of the power line between the switching power supply and the straight lamp shall not exceed 3 meters, otherwise the line loss will increase and the total power will increase.
- please use the wiring scheme in the connection diagram, with a maximum cascade of 10-20PCS, which requires power connection from end to end. There are several ways of power supply output and several ways of power supply to the light bar, so as to prevent overload of single power supply output and damage of power supply.
- when installing the straight lamp, screw the screw into the hole of the fixing frame and lock it tightly. After lighting for a long time, do not suspend the installation;
- when there is a bare conductor at the end of the straight lamp, first peel the wire about 10mm with diagonal pliers and screw it into the wiring head for insulation protection.
- to ensure waterproof and anticorrosive, after the power cord is screwed into the terminal head, it is recommended to inject the terminal head with single-component silica gel (or neutral glass glue or waterproof grease) to protect the exposed copper wire covering the power cord;
- do not live touch or live operation of this product;
- adjust the electric plate to the appropriate torque when installing the lamp plate, select ST2.9 pan head screw, the pan head diameter cannot exceed 8mm, lock the aluminum profile, fix it at 4 corners, prevent excessive force from damaging the lamp plate and bead;
- it is recommended to use the switch power (with short-circuit protection, overvoltage protection and overcurrent protection) with 80% power.
The package is wrapped with winding film
10PCS/ bundle, 300PCS in 5 layers per box