- AC100V/265V mains power input, no switching power supply, constant current IC drive, high efficiency, no stroboscopic, good brightness consistency.
- Adopt fire – retardant cover, protect electronic components, improve product safety.effect without macular.
- The light source is SMD3030, with three encapsulated wafer 14*28 luminescent chips, high brightness, low light fading, good color, long life and good stability.
- Using 10X60° optical lens, the light is scattered from two directions to ensure the uniformity of the light source, no macular spot, and the irradiation distance is up to 1.5m.
- High heat conduction aluminum substrate with 1.5mm thickness provides reliable heat dissipation for light source and improves product life.
- 3000W no need to continue power, high power connection efficiency, easy installation.
|Type of drive
|Male and female pair plugs
|Longest play distance
|ST2.9 Tapping Screw / Stainless steel clasp
Installation and Connection diagram
Diagram of lamp arrangement
- Power main line using 2×1.5mm² cable, if the straight light power line needs to be extended must choose 1.5mm²/16# above specifications of the wire, so as not to overload the power line heating is too large, leading to adverse consequences, the length of the power line between the switching power supply and the straight light shall not exceed 3 meters, otherwise the line loss increases, the total power increase;
- Please use the wiring scheme in the connection diagram, AC110-220V access, pay attention to safety;
- When installing the straight lamp, screw the screw into the fixing frame hole and lock it tightly. When the lamp is lit for a long time, it is forbidden to install;
- If there is a bare wire conductor at the end of the straight lamp, use diagonal pliers to peel the wire about 10mm and screw it into the connector for insulation protection.
- In order to ensure waterproof and anti-corrosion, after the power cable is screwed into the connector, it is recommended to use a single component of silica gel (or neutral glass glue, or waterproof grease) into the connector, covering the bare copper wire of the power cable for protection;
- Please do not touch this product with electricity.
Electrostatic packing size: 550*50*0.15mm
Carton size: 535*280*325mm
10PCS/ layer, 100PCS in total with 10 layers per box