- DC24V voltage input, safe and reliable, wide range of application.
- High-power constant-current drive ensures the brightness consistency of LED and the evenness of light box.
- GENESIS CSP1818 high-power LED, good heat dissipation, large current, high reliability.
- Adopt 2.0mm thick and high heat conduction aluminum substrate for heat dissipation, provide reliable heat dissipation for the light source, and improve the service life of the product.
- Using 15X45°optical lens, light is scattered from two directions to ensure the uniformity of the light source, no macular spot, and the irradiation distance is up to 3m.
- Patch terminal connection for easy installation and maintenance.
|Patch terminal and terminal lin
|Longest play distance
|ST2.9 self-tapping screws/T screws and nuts
Installation electrical diagram
Installation schematic description: the test panel is 3mm thick acrylic white board, and the light transmittance is about 54.4%. Aluminum alloy is selected as the light box model, which is evenly arranged according to the photoelectric performance parameters of the product
LED light efficiency data
- Power mainline use more than 2×2.5mm squared cable, if the straight lamp power cord needs to lengthen must choose 1.5mm squared /16# or more specifications wire, so as not to overload the power cord caused excessive heat, causing adverse consequences, the length of power cord between the switch power supply and the straight lamp should not exceed 3m, otherwise the line loss increases, the total power increase.
- please use the wiring scheme in the connection diagram, with a maximum cascade of 20PCS, which requires power connection from end to end. There are several ways of power supply output and several ways of power supply to the light bar, so as to prevent overload of single power supply output and damage of power supply.
- when installing the straight lamp, screw the screw into the hole of the fixing frame and lock it tightly. After lighting for a long time, do not suspend the installation;
- when there is a bare conductor at the end of the straight lamp, first peel the wire about 10mm with diagonal pliers and screw it into the wiring head for insulation protection.
- to ensure waterproof and anticorrosive, after the power cord is screwed into the terminal head, it is recommended to inject the terminal head with single-component silica gel (or neutral glass glue or waterproof grease) to protect the exposed copper wire covering the power cord;
- do not live touch or live operation of this product;
- it is recommended to use the switch power (with short-circuit protection, overvoltage protection and overcurrent protection) with 80% power.
Use electrostatic bag packaging：550*50*0.15mm
Inner box packing size：520*38*30mm
20PCS/ layer, 200PCS in 10 layers per box
Note: the above package quantity and weight only refer to the package as shown in the figure. When other packages are used,
the package quantity and weight will be different. The actual package shall prevail.